Roberts 1407 Vs 1509: Best pre-finished & solid wood Floors Fight
Confused about Roberts 1407 vs. 1509? We break down their strengths for pre-finished & solid wood floors. Roberts 1407 excels for thin wood, while 1509 tackles the toughest jobs.
Don’t let glue woes stall your wood floor project. Our guide to Roberts 1407 & 1509 clarifies which adhesive conquers your specific needs. DIY with confidence!
Roberts Adhesive is the best adhesive for engineered hardwood flooring.
Roberts 1407 Engineered Wood Flooring Adhesive:
Roberts 1407 Engineered Wood Flooring Adhesive
Best for:
- Pre-finished engineered wood flooring (up to 5″ wide and 1/2″ thick)
- Prefinished parquet flooring (plain back)
- Cork underlayment
Features:
- Acrylic urethane formula
- Easy to trowel with great green grab
- Solvent-free and environmentally friendly (LEED compliant)
- Low VOC emissions (< 1 g/L)
- GoldGuard® antimicrobial product protection
- Heavy residential/moderate commercial traffic rating
Pros:
- Ideal for most pre-finished engineered wood flooring installations
- Easy to apply with smooth consistency
- Environmentally friendly and low odor
- Strong bond and good grab strength
- Suitable for cork underlayment
Cons:
- Not recommended for solid wood flooring or engineered wood wider than 5″ or thicker than 1/2″
- Requires proper ventilation during installation
Roberts 1509 Wood Flooring Adhesive:
Roberts 1509 Wood Flooring Adhesive
Best for:
- Solid wood flooring
- Bamboo flooring
- Engineered wood flooring (wider than 5″ or thicker than 1/2″)
- Cork underlayment
- Glue-down installations
Features:
- Moisture-cure polyurethane formula
- High trowelability and excellent grab strength
- Extended working time (up to 45 minutes)
- Water-resistant and solvent-resistant
- Heavy commercial traffic rating
Pros:
- Strongest bond for solid wood, bamboo, and wide/thick engineered wood
- Extended working time allows for adjustments
- Water and solvent resistance for demanding applications
- Suitable for heavy commercial use
Cons:
- Not recommended for pre-finished engineered wood flooring
- More challenging to apply than Roberts 1407 due to thicker consistency
- Higher VOC emissions (21 g/L)
Here’s a table summarizing the key differences: Roberts 1407 Vs 1509
| Feature | Roberts 1407 | Roberts 1509 |
| Flooring type | Pre-finished engineered (up to 5″ wide, 1/2″ thick), parquet | Solid wood, bamboo, engineered (wide/thick), cork |
| Formula | Acrylic urethane | Moisture-cure polyurethane |
| Ease of application | Easy | Moderate |
| VOC emissions | Low (< 1 g/L) | High (21 g/L) |
| Bond strength | Good | Excellent |
| Traffic rating | Heavy residential/moderate commercial | Heavy commercial |
Roberts 1407 Vs 1509
Choosing the right adhesive:
The best choice for you will depend on the specific type of flooring you are installing and your priorities. If you are working with pre-finished engineered wood or parquet and need an easy-to-use adhesive with low VOC emissions, then Roberts 1407 is a good option. If you are installing solid wood, bamboo, or wider/thicker engineered wood and need the strongest possible bond, then Roberts 1509 is the better choice.
Roberts 1407 Vs 1509 Comparative Analysis:
- Moisture Resistance:
- Roberts 1407 is a solid choice for standard installations but may not be the best for areas prone to moisture issues.
- Roberts 1509 takes the lead with its advanced moisture control, making it ideal for installations in environments where moisture is a concern.
- Versatility:
- Both adhesives are versatile and suitable for various types of wood flooring, offering flexibility in application.
- Strength and Grab:
- Roberts 1407 boasts strong initial grab, ensuring a secure bond shortly after installation.
- Roberts 1509 matches strength while incorporating advanced features for installations that demand superior performance.
What Type Of Glue Do You Use For Engineered Hardwood?
Roberts are the best type of glue to use for engineered hardwood flooring is a urethane adhesive. Roberts Adhesive is the best adhesive for engineered hardwood flooring.
This type of adhesive is specifically designed for use with engineered hardwood floors and will provide a strong bond that will last for many years.
Other types of adhesives that can be used for engineered hardwood floors include floor glue for wood floors and hardwood flooring adhesive.
However, Roberts 1407 Engineered Wood Flooring Adhesive and Roberts 1509 Wood and Bamboo Flooring Adhesive is the best option and will provide the strongest bond.
When shopping for engineered hardwood glue, opt for a brand that doesn’t contain any water-based chemicals or hydrocarbons that can leave behind a cloudy film on your floors.
Roberts 1407-1 Engineered Wood Flooring Adhesive
The Roberts 1407-1 Engineered Wood Flooring Adhesive forms a strong, long-lasting adhesive between your flooring and the subfloor after curing, keeping your flooring in place.
A cutting-edge synthetic polymer dispersion adhesive with a very high solids content that is solvent-free.
This product can be used to install engineered laminated wood planks, dry-back parquet flooring, and acrylic-impregnated planks.
This product offers a strong bond, excellent water resistance, little to no smell, and a green grip. It is approved for usage in residential and high-traffic commercial settings.
Features:
- Application: Approximately 45 to 55 square feet of coverage for engineered wood installations and 70 to 80 square feet of coverage for prefinished parquet flooring installations.
- Material: ‎Wood
- Suitable Material: Acrylic, Wood
- Color: ‎Beige
- Cure Time: 24 Hours
- Level of Water Resistance: Water Resistant
Is Roberts 1407 Waterproof?
Roberts 1407-1 Engineered Wood Flooring Adhesive is designed to be water-resistant. However, it is not waterproof. If exposed to excessive water, the adhesive may break down and lose its bond.
Roberts 1407 Dry Time
Roberts 1407-1 Engineered Wood Flooring Adhesive Dry Time is 24 to 48 hours. This is a great product for your engineered wood flooring. This product will give you a great bond and it is easy to use.
How Much Adhesive Do I Need For Engineered Flooring?
If you are planning to install engineered hardwood flooring in your home, you will need to purchase an adhesive that is specifically designed for this type of flooring.
Most adhesives will cover between 40 and 60 square feet per gallon, so you will need to calculate the total square footage of the area where you will be installing the flooring.
Once you have determined how much adhesive you will need, you can purchase the appropriate amount and begin your project.
Roberts 1407 Instructions
Roberts 1407-1 makes an adhesive for engineered wood that can be used with planks up to 1/2 in. thick and 5 in. wide, including plain back parquet and acrylic-impregnated options.
It covers around 45 to 55 square feet per gallon when used on engineered wood and about 70 to 80 square feet when used on prefinished parquet flooring.
ROBERTS R1509-4 Wood and Bamboo Flooring Adhesive
This high-quality flooring adhesive for wood and bamboo works well with the vast majority of commonly used cork and wood species.
This adhesive with a density of 1.5315 dries at temperatures between 65 and 95 degrees Fahrenheit to form a connection that is waterproof, stain-resistant, flexible, and highly long-lasting.
Read the product label thoroughly in order to acquire information concerning the correct methods of application.
Roberts 1509 Dry Time
- Begins to Harden – Adhesives: 0 to 2 hr
- Full Cure Time – Adhesives: 8 to 10 hr
What Are The Benefits Of Glued Down Engineered Wood Floors?
Numerous manufacturers and installers prefer the glue-down method due to its enhanced stability. As a result of the floor being bonded down, the engineered hardwood will feel and sound more stable due to the reduced movement and creaking. On any type of subfloor, even an uneven one, it is possible to glue down floors.
What Is Glue Down Wood Flooring?
Glue-down wood flooring is a type of flooring that is attached to the subfloor with adhesive. This type of flooring is typically made of engineered hardwood or solid hardwood and is available in a variety of colors and finishes.
Glue-down wood flooring is durable and easy to install, making it a popular choice for both homeowners and commercial property owners.
Should You Glue Engineered Wood Flooring?
Gluing engineered wood flooring is a great way to ensure a long-lasting and durable bond between the flooring and the subfloor.
While it is not required, gluing can provide extra stability, especially in areas subject to high traffic or moisture.
When gluing engineered wood flooring, be sure to use a high-quality adhesive that is designed for use with wood floors.
Should You Float Or Glue Engineered Hardwood?
There are a few things to consider when deciding whether to float or glue engineered hardwood. Glue is more permanent, so if you are sure you want the hardwood flooring in your home for the long haul, gluing it down may be the best option.
However, floating is less messy and easier to install, so if you’re not sure about the hardwood or you’re not experienced in installing floors, floating may be the better option.
Is It Better To Glue Or Nail An Engineered Wood Floor?
There are pros and cons to both gluing and nailing an engineered wood floor. Glue can provide a stronger hold, making it less likely that the floor will come loose over time.
Nailing can be faster and easier, and it doesn’t require any special equipment. Ultimately, the best option depends on the specific flooring and the installation location.
What Glue Should I Use For Engineered Flooring?
When installing engineered hardwood floors, you have a few different choices for adhesives. You can use a traditional adhesive like Roberts 1407-1 Engineered Wood Flooring Adhesive or Bostik’s BEST urethane adhesive.
Or you can use a newer product like ROBERTS R1509-4 Wood and Bamboo Flooring Adhesive. Each has its own advantages and disadvantages, so it’s important to choose the right one for your project.
Is It Better To Glue Or Float Bamboo Flooring?
In the event that you have a cement subfloor, you will need to secure the bamboo flooring with glue. If you already have a hardwood subfloor, you have the option of securing the bamboo in place with either nails or glue.
Do You Need Underlayment For Glue Down Engineered Hardwood?
Yes, despite the fact that engineered wood is built to last, it almost always needs an underlayment to be installed underneath it.
Underlayment is an essential component in the installation of engineered wood flooring because it prevents the accumulation of moisture beneath your floors, maintains the warmth of your floors, minimizes noise, and smoothes out flaws in the subfloor.
Conclusion
If you can’t decide which is better, you’re not alone. The Roberts 1407 Vs 1509 are top-notch flooring adhesives. They’re both quick drying, capable of adhering to many surfaces, and solvent-free for a safer application process.
If you’re dealing with standard installations and prioritize a reliable adhesive with a strong initial grab, Roberts 1407 is a solid choice. However, if moisture is a concern or you’re undertaking a high-performance installation, Roberts 1509 emerges as the adhesive of choice, offering advanced moisture control and robust bonding capabilities.
Ultimately, the choice comes down to what type of wood you’re installing, and ultimately, your own personal preference. But don’t worry the 1407 and 1509 won’t disappoint either way.
