Roberts 2310 vs 7350: Unveiling the Differences in Construction Materials for Making Across Various Applications.

If you’re looking for a durable and long-lasting adhesive for your vinyl flooring, either the Roberts 2310 vs 7350 would be a great choice.

Both Roberts 2310 and 7350 are high-performance adhesives for vinyl flooring, but they cater to slightly different needs:

Roberts 2310:

• Best for: Fiberglass sheet goods and luxury vinyl tile (LVT).
• Type: Wet adhesive, requiring trowel application.
• Features:
  • High initial grab and bond strength.
  • Extended open time for positioning tiles.
  • Low odor and VOC emissions.
  • Can be used for both full spread and perimeter bonding.
• Cons:
  • Not suitable for all types of resilient flooring, such as VCT or linoleum.
  • Requires more time and effort for application compared to pressure-sensitive adhesives.

2310 has a pressure-sensitive formulation that is specifically created for fiberglass that is backed with sheet vinyl and extraordinary vinyl tile. You can also use it for modular carpets. It has a flexible working time and remains tacky for both permanent and releasable installations.

Roberts 7350:

• Best for: Large format LVT and planks, as well as most types of resilient flooring (VCT, linoleum, rubber).
• Type: Pressure-sensitive adhesive.
• Features:
  • Offers both releasable and permanent bond options.
  • Fast and easy application with minimal troweling.
  • High grab strength and holds even heavy tiles.
  • Low VOC emissions.
• Cons:
  • May not be as strong as wet adhesives for long-term performance.
  • Not recommended for use with all types of LVT, particularly thin or flexible ones.

The 7350 is a high-quality, high-solid cross-linking technology that is specifically created for tiles and planks made of luxury or solid vinyl. Because of its exceptional bonding and shearing qualities, it is perfectly suited for usage with big-size vinyl tiles. It also has excellent moisture and plasticizer migration resistance.

Both Roberts 2310 and 7350 are high-performance adhesives for vinyl flooring, but they cater to slightly different needs:

Roberts 2310:

Roberts 2310 Adhesive

• Best for: Fiberglass sheet goods and luxury vinyl tile (LVT).
• Type: Wet adhesive, requiring trowel application.
• Features:
  • High initial grab and bond strength.
  • Extended open time for positioning tiles.
  • Low odor and VOC emissions.
  • Can be used for both full spread and perimeter bonding.
• Cons:
  • Not suitable for all types of resilient flooring, such as VCT or linoleum.
  • Requires more time and effort for application compared to pressure-sensitive adhesives.

Roberts 7350:

Roberts 7350 Adhesive

• Best for: Large format LVT and planks, as well as most types of resilient flooring (VCT, linoleum, rubber).
• Type: Pressure-sensitive adhesive.
• Features:
  • Offers both releasable and permanent bond options.
  • Fast and easy application with minimal troweling.
  • High grab strength and holds even heavy tiles.
  • Low VOC emissions.
• Cons:
  • May not be as strong as wet adhesives for long-term performance.
  • Not recommended for use with all types of LVT, particularly thin or flexible ones.

Here’s a table summarizing the key differences:

Choosing the right adhesive:

If you are working with LVT or fiberglass sheet goods and need a strong, permanent bond, then Roberts 2310 is a good option. If you are looking for a quick and easy to apply adhesive that works with a wider range of flooring types, then Roberts 7350 is a better choice.

Difference Table: Roberts 2310 vs 7350

Here’s a table summarizing the key differences:

Roberts 2310: What Is 2310 Resilient Flooring Adhesive?

2310 Resilient flooring adhesive is a type of glue that is used to install resilient floorings, such as vinyl or linoleum.

This type of adhesive is designed to be strong and durable, yet flexible enough to allow the flooring to move slightly without breaking the bond.

ROBERTS 2310 Resilient Flooring Adhesive

The best adhesive for fiberglass-backed sheet vinyl, luxury vinyl tile, and modular carpet is ROBERTS 2310 Adhesive.

It is designed to bond instantly, and once it does so, it creates a strong connection that is stable over time. It is uniquely pressure-sensitive and sticky for the convenience of installers, and it may permanently bond or be quickly moved for the purpose of saving time and producing the best possible outcomes.

Features:

• Suitable Material: Fiberglass, Concrete
• Color: Beige
• Number of Items in a Package: 1
• Product Volume: 1 Gallon
• Complementary Elements: Adhesive
• Harden time: up to 60 minutes
• Curing time: 24 to 48 hours
• VOC content: < 1 g/L

1. Application Area And Uses

This product is best for use with concrete, APA-rated plywood, and terrazzo substrates in interior applications that will see light foot traffic.

One gallon of adhesive will cover between 160 and 190 square feet, depending on the size of the trowel used for application.

2. Roberts 2310 Vinyl Adhesive

The Roberts 2310 Vinyl Adhesive is a premium adhesive that is perfect for vinyl floors. This product provides a strong bond that is resistant to moisture and wear. This adhesive is easy to apply and will not damage your vinyl floors.

3. Roberts 2310 Adhesive Directions

To achieve the best results when using Roberts 2310 Adhesive, apply with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel for approximately 160 to 180 sq. ft. of coverage per gallon.

If using a 1/16 in. x 1/16 in. x 1/16 in. square notch trowel, you will get approximately 170 to 190 sq. ft. of coverage per gallon.

How To Use Roberts 2310 Adhesive/How Do You Use Roberts 2310?

To use Roberts 2310 adhesive, first, make sure that the surface you are trying to adhere is clean and dry. If there is any dirt or debris present, it will prevent the adhesive from bonding correctly.

Next, apply the adhesive to one side of the surface using a brush or roller. Once the adhesive is applied, immediately place the other surface on top and press down firmly. Allow the adhesive to dry for 24 hours before using the bonded surface.

How Do You Apply Resilient Flooring Adhesive?

Resilient flooring adhesive is a type of adhesive used to install resilient floorings, such as vinyl or linoleum.

This type of adhesive is typically applied with a trowel, and then the flooring material is laid over top. The adhesive will need to be given time to dry before the flooring can be used.

Is Vinyl Flooring Resilient Flooring?

Yes, Vinyl flooring is a type of resilient flooring, meaning it is designed to withstand heavy foot traffic and resist damage. It is made of a synthetic material, usually PVC, and is available in a variety of colors and patterns.

Vinyl flooring is easy to clean and maintain and is a popular choice for high-traffic areas such as kitchens, bathrooms, and laundry rooms.

Roberts 2310 Floor Adhesive

Roberts 2310 Floor Adhesive is a premium, professional-grade product that provides a strong, durable bond for flooring installations.

This high-strength adhesive can be used on a variety of flooring materials, including wood, laminate, vinyl, and more. Roberts 2310 Floor Adhesive is perfect for both residential and commercial applications.

Roberts 2310 Dry Time

It typically takes around 24 hours for the Roberts 2310 to completely dry. However, depending on the humidity and temperature levels in your home, it may take up to 48 hours for the adhesive to fully cure.

Can I use Roberts 2310 on FRP (fiber-reinforced plastic)?

Roberts 2310 is not recommended for use on FRP, as it is not specifically warranted for that application. Additionally, Roberts does not offer an adhesive that is specific to FRP installation, so it is not clear how well this product would work on that surface.

Roberts 2310 Adhesive Instructions

• Prepare your surface. Concrete, APA-rated plywood, and terrazzo substrates should be clean, dry, and free of debris before beginning.
• For permanent installations, use a 1/16 inch to apply adhesive x 1/16 in. x 3/32 inch U-notch trowel. For releasable installations, use a 1/16 in. x 1/16 in. x 1/16 in. square notch trowel.
• Spread the adhesive evenly over the surface, working in small sections.
• For permanent installations, allow the adhesive to set for 25 minutes before installing flooring. For releasable installations, wait approximately 160 to 180 minutes for the adhesive to become tacky.
• Install flooring according to the manufacturer’s instructions.
• For permanent installations, allow the adhesive to cure for 24 to 48 hours before walking on or placing furniture on the floor.

Roberts 2310 Glue

Roberts 2310 Glue is a high-performance all-purpose adhesive. It is ideal for a wide variety of projects, including woodworking, crafts, and more.

The glue has a strong bond that is resistant to heat, water, and most other common household chemicals.

Roberts 2310 Resilient Flooring Adhesive

 Roberts 2310 Resilient Flooring Adhesive is a great product for installing fiberglass sheet vinyl, small-format luxury vinyl tile, and modular carpet tiles.

It has the desired tack and flexible working time to make installation easy and stress-free. This product is available in a 4-gallon plastic pail and is perfect for residential to light commercial applications.

Roberts 7350 Reviews

Roberts 7350 Universal Flooring Adhesive: Vinyl Flooring Adhesive

Roberts 7350 Universal Flooring Adhesive is a premium, highly solid cross-linking technology for laying luxury or solid vinyl tile and plank flooring.

This powerful pressure-sensitive sealant is ideal for use with wide-format vinyl tiles because, in addition to its exceptional resistance to the migration of plasticizers and moisture, it offers exceptional binding and strong points. This makes it an excellent choice for use in a variety of other applications.

Furthermore, ROBERTS 7350 can be used to adhere carpet underlayment to the subfloor. Include this viscoelastic adhesive in your collection of solid/luxury vinyl tile and plank installation materials.

Features:

• Suitable Material: Marble, Concrete, Plastic, Metal, Wood
• Color: Off white
• Number of Items in a Package: 1
• Product Volume: 1 Gallon
• Installation Method: Adhesive
• Harden time: up to 60 minutes
• Curing time: almost 6 hours
• VOC content: 11 g/L
• Water Resistance: ‎Waterproof

Application Area And Uses

The Roberts 7350 Universal Flooring Adhesive is a superior quality, high-performance product that is ideal for the installation of all types of hardwood and laminate floors, as well as engineered and solid wood floors.

It can also be used for the installation of ceramic tile and natural stone floors. This product is perfect for both residential and commercial applications.

This product is formulated with a unique blend of polymers that provide excellent initial tack, bond strength, and extended open time.

It is also low odor and VOC compliant. This product can be used on all types of flooring substrates including wood, concrete, plywood, linoleum, and more.

How Long Does It Take Roberts 7350 To Dry: Roberts 7350 Drying Time

It typically takes Roberts 7350 about 4-6 hours to dry completely. However, this will vary depending on the specific circumstances, such as the humidity and temperature of the room, as well as the thickness of the paint.

Is Roberts 7350 Waterproof?

Roberts 7350 Universal Flooring Adhesive is a waterproof adhesive that can be used for both indoor and outdoor applications.

This product is perfect for use in areas where moisture is a concern, such as bathrooms, kitchens, laundry rooms, and basements. This adhesive is also great for use on porous surfaces, such as concrete, brick, and stone.

How Long Do Peel And Stick Floor Tiles Last?

Peel and stick floor tiles can last for a pretty long time – up to 25 years on average. But it really depends on how well they’re installed and how much traffic they see. If they’re constantly exposed to water, they won’t last as long.

What Is The Best Adhesive For Peel And Stick Vinyl Tiles?

The Roberts 7350 Universal Flooring Adhesive is the best adhesive for peel-and-stick vinyl tiles. It is a waterproof core flooring adhesive that is easy to apply and provides a strong bond between the vinyl tile and the floor. It is also easy to clean up with a damp cloth.

Questions For Your Interests

How Long Do You Have To Wait To Walk On A Vinyl Floor?

As a general rule of thumb, you should wait 3-4 days before walking on a new vinyl floor. However, if you need to walk on it sooner, you can help the adhesive cure faster by keeping the room temperature above 68 degrees Fahrenheit. Doing this will help you cut down the required wait time by a full 24 hours.

How Long Does Vinyl Flooring Adhesive Take To Dry?

Vinyl flooring adhesive typically takes 12 to 20 hours to dry, although it is usually best to give it 24 hours before placing heavy furniture on the floor.

The drying time can vary depending on the level of humidity in the room where the adhesive is being applied.

How Long Does It Take Floor Glue To Dry?

It takes floor glue to dry anywhere from 12 to 20 hours, depending on the humidity levels of the room. Most adhesives will be fully cured within 24 hours, at which point the floor can handle light traffic. However, it’s advised to wait at least 24 hours before putting heavy furniture on the floor.

How Long Does Linoleum Need To Dry?

Before placing furniture on linoleum or walking on it, it must be allowed at least 72 hours to dry. You risk permanently denting the linoleum if you do either of these activities before it has had an opportunity to dry.

Conclusion

At the end of the day, you can’t go wrong with either one, so it really comes down to what your individual needs are. 2310 has a longer pressure-sensitive working time, whereas the 7350 is better suited for high-quality vinyl tiles.

So before you make your final decision, make sure that you consider all of the possible differences between these two products. If you do that, then buying the right flooring adhesive for your needs should be easier than ever.